Clinton Electronics Camera Pole White- adjustable 1' 7.25" to 3'

A telescoping camera pole drops a pendant mount camera below an open ceiling without running conduit to it. On a warehouse, a big box retail floor or anything with exposed truss, that is the difference between a half day of conduit work per camera position and a single bolt into the truss.

The short one, adjustable from 1 foot 7.25 inches to 3 feet. Use it where the ceiling is already low enough and you only need to clear a duct, a beam or a light fitting. At 1.95 lbs it is the pole you can hold in one hand while you get the bolt started.

It carries the highest camera weight in the range at 15 lbs, because a short pole has less leverage working against it. That headroom covers a multi sensor or a small PTZ, not just a fixed dome.

It mounts to steel web truss or strut channel with one bolt, ends in a 3/4 inch EMT conduit diameter that fits nearly every pendant mount, and ships with the safety cable and the threaded conduit adapter in the box. There is an adjustable level on the pole, which matters more than it sounds: a camera hung a couple of degrees off reads as sloppy from the floor and nothing about the image will tell you why. UL listed, with a three year warranty and first year advance replacement.

Ordering

White is CE-CP3W and black is CE-CP3B. Same pole, same hardware, and the finish is worth thinking about: white disappears against a painted deck, black disappears against exposed structure and dark ceilings.